Dr. Sanjay Marwaha
Professor
Electrical and Instrumentation Engineering
01672-253170, 253120
———————-
———————–
marwaha_sanjay@yahoo.co.in
Ph.D., Guru Nanak Dev University (GNDU) Amritsar, 2000.
################################################################################
M.E. (Power System), Punjab Engg. College Chandigarh, 1990.
B.E. (Electrical Engg.), Madan Mohan Malviya Engg. College (MMMEC) Gorakhpur, 1988.
List of attended FDP’s/ Training Programmes
Online Orientation “Training Programme for Mentors under National Initiative for Technical Teachers Training”, August 02 – 06, 2021. (https://www.dropbox.com/s/5lmigyin8gb92vs/NITTTR%20Mentor%20Workshop%20Aug.%202-6%2C%202021.pdf?dl=0)
“Management Capacity Enhancement Programme” under Technical Education Quality Improvement Programme, IIM Udaipur, February 13-18, 2017. https://www.dropbox.com/s/6kem46wk7rs247h/Management%20Capacity%20IIM%20Udaipur%20Feb.%2013-18%2C%202017.pdf?dl=0
Short Term Training Programme on “Improving Industry Institute Interaction”, TTTI Chandigarh, July 1-5, 2002. (https://www.dropbox.com/s/ap51f9glzjqo702/STC-TTTI%20Chandigarh%20July%201-5%2C%202002.pdf?dl=0)
Training Programme on “Performance Appraisal and Development System”, REC Kurukshetra, March 3-5, 1995. (https://www.dropbox.com/s/ql1sby399zpcosm/Training%20Programme%20ISTE%20RECK%20March%203-5%2C%201995.pdf?dl=0)
Short Term Course under Continuing Education Program/ QIP Program on “Automatic and Adaptive Mesh Generation for Finite Difference and Finite Element Applications”, IIT Madras, July 4-9, 1994.(https://www.dropbox.com/s/05vp7bh33rc10lr/STC-IIT%20Madras%20July%204-9%2C%201994.pdf?dl=0)
Short Term Course under QIP on “Artificial Neural Network Applications to Power Systems”, IIT Kanpur, June 14-19, 1993. (https://www.dropbox.com/s/fs4vg5lwcyfei6z/STC-IIT%20Kanpur%20June%2014-19%2C%201993.pdf?dl=0)
Presently working as Professor in SLIET Longowal since December 11, 2002 (https://www.dropbox.com/s/awav6mumpnnm1vg/SLIET%20Joining.PDF?dl=0)
Assistant Professor, Beant College of Engg. & Tech. Gurdaspur from September 19, 1996 to December 10, 2002. (https://www.dropbox.com/s/is5baxw7gkyzjiv/BCET%20Exp.pdf?dl=0)
Assistant Professor, GZS College of Engg. & Tech. Bathinda from June 09, 1995 to September 18, 1996. (https://www.dropbox.com/s/stfytfz038942rc/GZSCET%20Exp.pdf?dl=0)
Lecturer, Regional Engineering College Kurukshetra from August 03, 1989 to June 08, 1995. (https://www.dropbox.com/s/aqlnc8xmyfyidfv/RECK%20Exp.pdf?dl=0)
Authored three (03) technical books Wrote one (01) book chapter
Fellow, Institution of Engineers (F-111916-4). (https://www.dropbox.com/s/n0na9cas3iw4bzl/Fellow-Institution%20of%20Engineers%20Dec.%2020%2C%202006.pdf?dl=0)
Life Member, ISTE (LM-13060).
IEEE Annual Membership.
Award for “Excellent contribution in Education Sector” conferred by AICTE during 2nd National Punjab Summit and Awards 2017 TM held on 13th April 2017 in Chandigarh. https://tinyurl.com/2p8a6uew
Certificate of Merit by Institution of Engineers, Letter Ref. No. SC/T-102/COM/2008 dated 27.01.2009. https://tinyurl.com/3c5uheds
Best Citizens of India Award 2009.
Publication List
https://www.dropbox.com/s/h7rolpk4wk6qkii/Publication%20List%2016022023.docx?dl=0
Scopus Id:
https://www.scopus.com/authid/detail.uri?authorId=7003909511
Google Scholar Weblink:
https://scholar.google.com/citations?user=uuc8CM8AAAAJ&hl=en
Orcid Id:
https://orcid.org/0000-0003-4852-5976
Total Research Publication: 172 International Journals: 56 National Journals: 11 International Conferences: 47 National Conferences: 58
—Supervised 9 Ph.D thesis, 5 Ph.D thesis are in progress.
“Finite Element based Steady & Quasi-Steady Field Analysis of Electromagnetic Devices Using h-Adaptive Refinement Technique” (Registration No. : 09.11.06, Enrolment Date: 23.08.06, Notification Date: 07.01.2011), Dr. Ajay Kumar, PTU Jalandhar.
################################################################################ “Electromagnetic Field Analysis of Linear Induction Motor by Self Adaptive Finite Element Method” (Registration No.: SLIET/Phd/25/2007 Date: 09.01.08, Notification Year: 2015), Dr. Manpreet Singh Manna, SLIET Longowal.
“Robust Control of Grid Connected Doubly Fed Induction Generator (DFIG) Based Power Systems” (Registration. No.:PEI-1104, Date:25/05/2012), Dr. Sukhwinder Singh, SLIET Longowal.
“Energy Estimation & Optimization for Low Power DSP” (Registration No. : 15.06.04, Enrolment Date: 06.04.2004, Notification Date: 10.09.2009), Dr. Amanpreet Singh, PTU Jalandhar.
“Quasi-static Field Analysis of Electrical Machines Using h-Hierarchical Adaptive Finite Element Method” (Registration. No.: PEI/1006, Date: 04.10.2010), Dr. Chetan Vasudeva, SLIET Longowal.
“Development of Solar-Biogas Model for Generation of Energy” (Registration No.: PEE/1005, Date: ), Dr. Gurinder Pal Singh, SLIET Longowal.
“Design and Performance Analysis of Combined Radial and Axial Flux of Permanent Magnet Synchronous Motor” (Registration No.: PEI/1108, Date: 25.07.2011), Dr. Gurmeet Singh Grewal, SLIET Longowal.
“Design of Nanomaterial based Microwave Absorbers for Antenna Arrays” (Registration No.: PEC/1701, Date: 14/08/2017), Dr. Surekha Rani, SLIET Longowal.
“Assessment of Power Quality Disturbances in a Distribution System” (Registration No.: PEI/1703, Date: 08/06/2018, Notification: 2021), Dr. Rajat Kumar, SLIET Longowal.
Undergoing Ph.D Thesis (05): “An Optimal Solution of Generation Scheduling Problem with Electric Vehicle Operation and Renewable Energy Source Using Hybrid Meta-Heuristic Search Algorithm” (Registration No.: PEI/1901, Date: 07.08.2019), Mr. Ashutosh Bhadoria, SLIET Longowal.
“Nanomaterial Based Antenna Applicators for Microwave Hyperthermia” (Registration No.: PEC-1602, Date: 18.07.2016), Ms. Alka, SLIET Longowal.
“Design and Performance analysis of Synchronous Motor for Battery Operated Electric Vehicles” (Registration No.: PEI/1802, Date: 02/08/2018), Ms. Rupam, SLIET Longowal.
“FEM based design and analysis of motor(s) for water pumping applications” (Registration No.: PEI-1813, Date: 04/02/2019), Mr. Avinash Kumar, SLIET Longowal.
“Design and Analysis of Integrated Radial and Axial Flux Permanent Magnet Synchronous Motor for Electric Vehicle” (Registration No.: PEI-2002, Date: 24/11/2021), Mr. Gautam Kumar, SLIET Longowal.
“Optimal Selection of Design Parameters For Electric And Hybrid Electric Vehicles Using Meta-Heuristics Search Algorithm” (Registration No.: 41800517, Date: 28.02.2020), Ms. Kamal Sharma, Lovely Professional University, Phagwara.
—Supervised 34 PG dissertations.
“Performance analysis of PMSM and PMBLDC Motor”, SLIET Longowal, 2021 (Regn. No.: PGICE/1950101), Kunal Kumar.
“Design and Analysis of Switched Reluctance Motor for Electric Vehicles”, SLIET Longowal, 2018 (Regn. No.: PGICE/1650174), Avinash Kumar.
“Design and Analysis of Permanent Magnet Brushless DC Motor for Solar Vehicle”, SLIET Longowal, 2017 (Regn. No. PG/ICE/1553007), Vipin Kumar Singh
“Design and Analysis of Permanent Magnet Linear Generator for Wave Energy”, SLIET Longowal, 2017 (Regn. No. PG/ICE/1553001), Ashish Kumar Singh
“Design and Analysis of Generator for Wind Energy Applications”, SLIET Longowal, 2017 (Regn. No. PG/ICE/15/SL/2207), Kamal Kandpal
“Finite Element Design and Analysis of Capacitor Start and Run Single Phase Induction Motor” SLIET Longowal, 2016 (Regn. No. PG/ICE/1454013), Ashok Kumar Yadav
“FEM Based Design and Analysis of Three Phase Induction Motor”, SLIET Longowal, 2016 (Regn. No.: PG/ICE/1454017), Prabhash Ranjan
“Design and Analysis of Brushless DC Motor for Solar Water Pumping”, SLIET Longowal, 2016 (Regn. No.: PGICE/ 1650154), Ankita Bharati
“Eddy Current Analysis of Magnetic Structures Using Finite Element Method” SLIET Longowal, 2015 (Regn. No. PG/ICE/1363220), Rashmi Pant
“Design and Analysis of 2D Permanent Magnet Generator Using Finite Element Method” SLIET Longowal, 2015 (Regn. No. PG/ICE/136303), Anjali.
“Finite Element Analysis of Time Dependent Eddy Current Fields” SLIET Longowal, 2012 (Regn. No. PG/ICE/088201), Anubha
“Electromagnetic Field Analysis of Generator using Adaptive Finite Element Method”, SLIET Longowal, 2011 (Regn. No. PG/ICE/098217), Abhinav Dogra
“Study and FE Analysis of Linear Induction Motor Performance on Variation of Geometrical Based Parameters”, SLIET Longowal, 2011 (Regn. No. PG/ICE/098205). Rakesh Kumar
“Antenna Designing Using Finite Element Method”, SLIET Longowal, 2010 (Regn. No.: PG/ICE/8202/08), Manu Prakram
“Field Analysis of Linear Induction Motor Using Adaptive Finite Element Method”, SLIET Longowal, 2010 (Regn. No.: PG/ICE/8211/08), Atul Singh
“Finite Element Field Analysis of Human Body”, PTU, Jalandhar, 2009 (Regn. No. PG/ICE/9111/07), Smita Dinkar
“Two Dimensional Quasi-static Field Analysis of Linear Induction Motor using Adaptive FEM”, SLIET Longowal, 2009 (Regn. No.: PG/ICE/9104/07), Chetan Vasudeva
“2-D Finite Element Analysis of Electrostatic and Magnetostatic Field Problems”, SLIET Longowal, 2009 (Regn. No. PG/ICE/9107/07).
“Finite Element Analysis of Balanced Patch Antenna”, PTU Jalandhar, 2008 (Univ. Roll No.: M-6230641309, Regn. No. PG/ICE/6104/06), Ranbir Singh Dhindsa
“Analysis of Single Sided Linear Induction Motor Using Finite Element Method”, PTU Jalandhar, 2008 (Regn. No. PG/ICE/6102/06), Manvir Kaur
Microwave Coagulation Therapy Using Finite Element Method”, PTU Jalandhar, 2008 (Regn. No. PG/ICE/6101), Manish
“Eddy Current and Skin effect Analysis using Finite Element Adaptive Grids”, PTU Jalandhar, 2006 (University Roll No. M-04230605), Puneet Sokhi
“FD and FE Analysis of Horn Antennas”, PTU Jalandhar, 2006, Urmi Agnihotri
“Field Analysis of Electromagnetic Devices Using h-Adaptive FEM” PTU Jalandhar, 2005 (University Roll No. 323038312), Pooja Sharma
“Analysis and Computation of Eddy Currents in Magnetic Structures Using FEM”, PTU, Jalandhar, 2005 (University Roll No.- 323038314), Rishi Sarup Sharma
“Field Analysis of Electromagnetic Devices using HFEM”, PTU, Jalandhar, 2005.
“Design and Implementation of DSP Based Single Phase UPS Employing IGBTS”, PTU Jalandhar, 2004 (University Roll No. 22306102, Regn. No. PG/ICE/09/02), Suresh Kumar
“Finite Element Formulation and Design of Transformer”, PTU Jalandhar, 2004 (University Roll No. 22306099, Regn. No. PG/ICE/11/02), Sandeep Thakur
“Analysis of Three Phase Induction Motor on Single Phase Supply”, Kurukshetra Univ. Kurukshetra, 1995.
“Transient Stability Analysis of Nine Bus System”, Kurukshetra Univ. Kurukshetra, 1995. Enrolment No,: 762/91-347, Anil Kumar Dahiya.
“Study of Magnetic Field in DC Machines by Finite Element Method”, Kurukshetra Univ. Kurukshetra, 1994.
“Analysis of Switching Transients Using a Multiwinding Transformer Model”,Kurukshetra Univ. Kurukshetra, 1993.
“Some Aspects of Self Excitation and Excitation Control of Alternators”, Kurukshetra Univ. Kurukshetra, 1993.
“Use of Personal Computer in the Analysis of Load Flow Problems”, Kurukshetra Univ. Kurukshetra, 1992, Vinay Kumar Gautam
Sponsored Projects:
Coordinator, MODROBS-Rural, ‘Analytical and Biomedical Instrumentation Laboratory’, FY: 2019-2020, Amount: Rs. 11,82,500=00
(https://www.dropbox.com/s/l3e81hqisyu92g3/AICTE%20MODROBS%202019%20%20Sanction%20Letter.pdf?dl=0)
Principal Investigator, MODROB Project, ‘Modernization of Communication Engg. Lab’, FY: 2001-02, Amount: Rs. 6,00,000=00.
(https://www.dropbox.com/s/epn53y5rwkd76i2/AICTE%20MODROB%202002%20Sanction%20Letter.pdf?dl=0)
Copyright © 2023 , Sant Longowal Institute of Engineering and Technology, Longowal - 148106 Distt. Sangrur, Punjab, India Developed & Maintained by Administrative Computer Services System (A.C.S.S), SLIET
